Have you heard of the Pi2 Atomizer? It is the world’s first and only flat deck design RDA. Hyon USA, its developer, launched it at Vape Summit III through their president, Fernando Solis. Many vapers consider it the first post-less atomizer and praise its flavor-enhancing design.
The Pi2 Atomizer stands out for its user-friendliness. It is easy to handle, especially for beginners in rebuildable dripping atomizers. Moreover, it offers a distinctive vaping experience that differs from traditional cigarettes.
In this blog post, we will review the Pi2 Atomizer in detail. We will cover its features. We aim to thoroughly analyze this unique RDA and help you decide if it suits your vaping needs. So, let’s dive into the blog post and its role in the vaping world.
An overview of the Pi2 Atomizer’s Flat deck design
One of the most unique features of the Pi2 Atomizer, developed by Hyon USA, is its flat deck design. Unlike traditional RDAs with posts, holes, and screws on the deck, the Pi2 Atomizer has a completely flat deck. This design provides several benefits over traditional post designs.
First and foremost, the flat deck design provides more space for coils and wicks. This allows for greater creativity and flexibility in coil building. Additionally, the lack of posts means that coil alignment and placement is easier, as there are no posts to work around.
Another benefit of the flat deck design is that it reduces the distance between the coils and the mouthpiece. This, combined with the direct airflow, produces better flavor due to the reduced chamber size.
In conclusion, the flat deck design of the Pi2 Atomizer provides several benefits over traditional post designs. It allows for easier coil alignment and placement, more creativity and flexibility in coil building, and better flavor production due to reduced chamber size and direct airflow. The quality of the build by Hyon USA further enhances these benefits.
A guide to building on the Pi2 Atomizer’s Terminal Caverns
The Pi2 Atomizer, included with some mods, features a pair of unique terminal caverns, slots on the side of the deck where the coils are inserted and secured with flat-headed screws. There are four caverns in total, two for each coil, and they come in different sizes to accommodate different wire gauges. The screws are made of copper for better conductivity.
Building on the terminal caverns is a straightforward process. First, cut the leads of the coils to fit the caverns. Then, insert the leads into the caverns and tighten the screws. Finally, adjust the coils to parallel the deck and center in the chamber. Once you have completed these steps, you can attach the barrel and top cap to complete your build.
Some tips and tricks can help you build on the terminal caverns more effectively. For example, using a coil jig or a screwdriver to wrap and shape the coils can make the process easier. Additionally, using a ceramic tweezer or a plier to pinch and strum the coils can help eliminate hot spots. Finally, use enough cotton to fill the caverns but not too much to block the airflow.
Maximizing performance with the Pi2 Atomizer’s Copper center pin
The Pi2 Atomizer, developed by Hyon USA, features a copper center pin, which provides a solid and precise connection and good conductivity. This small but important component plays a crucial role in ensuring the stable and consistent performance of the Pi2 Atomizer when used with a mod.
One of the key benefits of the copper center pin is that it reduces voltage drop and increases the power output of the mod. This means you can enjoy a more satisfying vaping experience with less battery drain. The copper center pin also helps prevent short circuits and battery damage due to poor contact.
In addition to these benefits, the copper center pin is just one of many high-quality components that make the Pi2 Atomizer stand out among other products in its category. By using top-notch materials and following strict manufacturing standards, Hyon USA has created a product that delivers exceptional performance every time.
How to use?
The Pi2 Atomizer is a unique and innovative RDA that offers several benefits over traditional post designs. This section will provide a step-by-step guide on how to use it, including tips and tricks for getting the most out of this exceptional device.
Preparing the Deck
Before you begin building on the Pi2 Atomizer, preparing the deck is important. This involves removing the top cap and barrel to expose the flat deck and terminal caverns. Make sure the deck is clean and debris-free before you begin building.
Building on the Terminal Caverns
The next step is to build on the terminal caverns. This involves cutting the leads of your coils to fit the caverns, inserting the leads into the caverns, and tightening the screws to secure the coils in place. Once your coils are installed, adjust them to parallel the deck and center in the chamber.
Wicking
After your coils are installed and adjusted, it’s time to wick them. Cut a cotton strip wide enough to fill the caverns but not so wide that it blocks airflow. Thread the cotton through the coils and trim the ends so that they touch the bottom of the deck.
Priming and Firing
Once your coils are wicked, it’s time to prime them with e-liquid. Apply e-liquid directly to the coils and cotton until they are fully saturated. Then, pulse fire your mod to heat up the coils and vaporize any excess e-liquid.
Vaping
After your coils are primed and fired, you’re ready to vape! Reattach the barrel and top cap, ensuring the airflow holes are aligned with your coils. Take a draw on your mod and enjoy the exceptional flavor and vapor production of the Pi2 Atomizer.
Hyon USA manufactures the Pi2 Atomizer, and it comes with various accessories in the box. These accessories can help you customize your vaping experience and get the most out of this unique RDA. Learn about the different accessories and how they can enhance your vaping experience.
One of the key things that makes the Pi2 Atomizer stand out is its versatility. This RDA can accommodate your preferred style, whether you prefer mouth-to-lung or direct-to-lung vaping. Experiment with different coil builds wicking techniques, and accessories to find the perfect setup.
Adjusting the Airflow Options
The Pi2 Atomizer, a popular choice among e-cigarette enthusiasts, features several airflow options, allowing you to customize your vaping experience to your preferences. These options include four holes on the top cap and two holes on the side of the base of the deck, which can be adjusted in different configurations.
The top airflow consists of four holes on each side of the top cap. These holes can be adjusted by rotating the cap to align or misalign them with the deck holes. This allows you to increase or decrease the airflow to your liking.
The side airflow consists of two fixed holes on each side of the deck. These holes are designed to provide a consistent and smooth airflow to your coils.
There are other ways to customize your vaping experience with the Pi2 Atomizer. For example, using a single or dual coil build can affect the airflow and resistance of your setup. Using different drip tips can change the airflow and flavor of your vape. The deep juice well also allows for longer vaping sessions without having to drip more juice constantly.
The pros
Flat deck design
The Pi2 Atomizer features a flat deck design, which provides more space for coils and wicks, allows for easier coil alignment and placement, and results in better flavor production due to reduced chamber size and direct airflow.
Deep juice well
The deep juice well allows for longer vaping sessions without having to drip more juice constantly. This makes the Pi2 Atomizer a convenient and practical choice for vapers on the go.
High-quality build
The Pi2 Atomizer is manufactured by Hyon USA using top-notch materials and following strict manufacturing standards. This ensures you receive a high-quality product that delivers exceptional performance every time.
Conclusion
In conclusion, the Pi2 Atomizer is a unique and innovative RDA with several advantages over traditional post designs. Its flat deck design, terminal caverns, airflow options, deep juice well, and high-quality build make it a top choice among vapers who value flavor and versatility. If you’re in the market for a new RDA, the Pi2 Atomizer is worth considering.
